 |
 |
 |
|
Blackmagic HyperDeck Extreme Control gives you traditional deck control features with a built in editor for automating the ingest of legacy videotape based programming. Combined with HyperDeck Extreme, you get a professional deck solution that's exciting and fast to use. There are transport control buttons, timecode, deck status, plus a large search dial with electronic clutch for jog, shuttle and positioning.
Controlling up to 8 separate decks is possible using standard RS-422 ensuring compatibility with virtually any type of deck! It's even possible to edit between different video standards, so you can up convert old 4:3 interlaced SD masters to 1080p HD in 16:9 via a Teranex Express converter.
-
Connections- Deck Control Outputs: 8 x RS-422
- Reference Input: Tri-Sync or Black Burst.
- Reference Output: Follows reference input.
- Ethernet: 1Gb/s
- Computer Interface: 1 x USB-C for software updates.
Supported Protocols - Control Protocols: Sony
Software - Internal Software Upgrade
- Loaded at system start, or via Blackmagic HyperDeck Setup using USB port.
Displays - 8 digit, 7 segment LED timecode display.
Power Requirements - Power Supply: 1 x Internal 100 - 240V AC. 1 x 4 pin XLR 12V DC IN for external power or battery use.
Environmental Specifications - Operating Temperature: 0° to 40° C (32°to 104° F)
- Storage Temperature: -20° to 60° C (-4° to 113° F)
- Relative Humidity: 0% to 90% non-condensing
Weigths & Dimensions - Dimensions: 8.28 inch x 5.14 inch x 13.83 inch
- Weight: 3.53 lb
-
- HyperDeck Extreme Control
- SD card with user manual.
-
- 12 Month Limited Manufacturer's Warranty.
-
- Mac 10.13 High Sierra, Mac 10.14 Mojave or later.
- Windows 8.1 or Windows 10.
|
|
|
 |
|
 |
|